range

Fan to be made, very useful by high temperatures.

It is necessary to print :

the middle sticks (x10)
the finishing rods (x2)
the tracing guide for the fabric
You'll need a 50cm x 30cm piece of thin fabric or paper (curtain sheer for my part), glue and a rivet/or string.

Then position the fabric on a piece of cardboard and on a flat surface. Place the guide close to the edge of the cardboard and about in the middle (on the side of the 50cm), fix it with a pin on the axis of rotation (see diagrams in the folder).

Trace the markings then rotate the guide to the traced markings, trace the markings again, repeat the operation a total of 12 times.

Cut the fabric then glued the rods with the help of the markings.

Fan to make, very useful in high temperatures.

You must print:

the middle sticks (x10)
the finishing strips (x2)
the tracing guide for the fabrics
You will need a 50cm x 30cm piece of thin fabric or paper (curtain sheer for me), glue and a rivet/or string.

Then position the fabric on a piece of cardboard and on a flat surface. Place the guide close to the edge of the cardboard and roughly in the middle (on the 50 cm side), fix it with a thumbtack on the axis of rotation (see diagrams in the file).

Trace the markers then rotate the guide to the markers drawn, trace the markers again, repeat the operation a total of 12 times.

Cut out the fabric then glue the strips using the markings.